Flying fast and farFolding method of aircraftThe paper airplane folding method is as follows: Prepare the material cardboard 1 Fold a square piece of colored paper in half in the middle and unfold itFolding method of aircraft, and then fold the two sides in half towards the center line to get the crease shown in the figure below. See Figure 2 below. Fold the left and right corners upwards, aligning the corners to the crease in the middle, as shown in the figure. 3 Turn the paper over to the back, fold both sides towards the middle, as shown in the figure. 4 Then turn the paper over to the back, and fold the lower corner upward as shown in the figure. 5.
Folding method of aircraftI first folded the paper in half, trying to make both sides symmetrical, then opened it, folding one corner from the top to the middle and then folding the other corner, then folding the first corner again, and folding the third corner in the same way. Then I stretched the two wings, and an airplane was completed. I named it "Shenzhou VII". Next, I was about to test flight. I picked up the plane and spat it with my mouth, threw it up hard, and the plane flew high again.
The chapter describing the process of making a paper airplane is as follows: Today, my classmates and I folded the paper together. We first took out a rectangular piece of paper, folded it in half from left to right, then opened it, and then folded the two corners above the paper inwards. Once again, fold the two corners above the paper inwards, then a sharp corner will be formed on the top, fold the corner downward, and then fold it in half left and right. Finally, the two sides are opposite sides, and the corners are folded in diagonal. An airplane is completed. Two chapters are completed.
The folding method of China's four major paper airplanes is as follows: 1 A standard folding paper airplane folds the paper vertically in half. After unfolding, fold the four corners on the diagonal. Then fold the paper in half and fold the two triangles to form wings. Finally, fold the nose part. 2 A large-wing folding paper airplane folds the paper longitudinally, and then folds the sides toward the middle to form an outer triangle that coincides with the center line.
The complete diagram of the folding method of the aircraft is as follows: 1 Find an A4-sized origami and fold it in half along the long side to find the middle line, then unfold and fold the left and right upper corners along the middle line, as shown in the following figure. 2 Then continue to fold the left and right upper corners along the middle line, as shown in the following figure. 3 Fold the upper and lower corners up and down, so that the tip of the triangle is aligned with the middle point at the end, as shown in the following figure. 4 Next, fold the bottom of the triangle a little like the figure below.
还没有评论,来说两句吧...